Solution (3):- If you do not have Ethernet port into your computer then purchase the Ethernet card of 10/100 mbps and just fix it into the P.C.I slot of your computer, If you are using the operating system Win XP then it will probably automatically install the software (firmware) for your Ethernet card, and if the software is not installed automatically when the P.C is turned on then you may install the firmware provided with the Ethernet card.
Solution(2):- Either your wall mount is not correctly crimped according to the standards or your cable is not correctly crimped according to the standards. So its better you crimp the cable and fix the R.J 45 connector in the sequence given herewith. Color coding of the cable: -
1-Oranage white
2-Orange
3-White green
4-Blue
5-White blue
6-Green
7-White brown
8-Brown
The same Sequence should be at the wall mount and at the R.J 45 connector
1-Oranage white
2-Orange
3-White green
4-Blue
5-White blue
6-Green
7-White brown
8-Brown
The same Sequence should be at the wall mount and at the R.J 45 connector
Solution(1):- First of all connect with the cable computer and your ethernetcard and phoneline to your modem c2110 and then turn on the power of your modem,then type the address 192.168.1.1 at the explorer bar.There you will find a pop up requesting you to enter username and password,enter the admin as username and admin as the password.Then proceed and just click on configuration given on the left side of the page,after clicking three subheadings you will find first local network the other internet and the third one DSL home, then just click on the internet their you will find several things to edit but you only click on the edit button infront of where "pppoe_0_35" is written, after that just do next and next untill you will find at one place Broadbandusername and Broadbandpassword, there u enter the username and password provided by the BSNL, after that, click on the APPLY button, and wait for few seconds. and then close the window, and now enjoy surfing internet.
